Commands - Gefen Multiview EXT-HD-MVSL-441 User Manual

Advanced Operation Chapter

Commands

Command
#chromakey
#chromakey_color
#display_telnet_welcome
#fade
#fadefault
#help
#lock_aspect
#lock_edid
#mask
#mirror
#mute
#power
#reboot
#recall_preset
#rotate
#save_preset
#set_bank_name
#set_brightness
#set_contrast
#set_edid
#set_gateway
#set_hdcp
#set_hposition
#set_hsize
#set_http_port
#set_hue
#set_ipadd
#set_ipmode
#set_ir
#set_netmask
#set_osd
#set_output
#set_preset_name
#set_priority
Description
Enables or disables chroma-keying
This command will be available in a future release of
the firmware
Enables or disables the Telnet welcome message
Enable or disable fade effect
Resets the current routing and masking state to
factory-default settings
Displays the list of available commands
Locks the aspect ratio of all inputs
Locks the local EDID when the switcher is
power-cycled
Masks the specified outputs
Enables or disables window mirroring
Enables or disables muting on all outputs
Toggles the power on the switcher
Reboots the switcher
Loads the specified routing preset into memory
Rotates the video signal
Saves a routing preset to memory
Assigns a name to the specified bank
Sets the brightness level for all outputs
Sets the contrast level for all outputs
Assigns the specified EDID to an input or bank
Sets the gateway address
Enables or disables HDCP detection
Sets the horizontal position of the specified window
Sets the horizontal size of the specified window
Sets the HTTP listening port
Sets the hue for all outputs
Sets the IP address
Sets the IP mode (DHCP or static)
Sets the IR channel of the switcher
Sets the subnet mask
Enables or disables the OSD (On-Screen Display)
Sets the output resolution
Assigns a name to the specified preset
Sets the priority for the specified window
page | 70