Chapter
Advanced Operation
#help
The #help command displays the list of available RS-232 / Telnet commands. Help on a
specific command can be displayed when using param1.
Syntax
#help param1
Parameters
param1
Example
#help #sipadd
SET IP ADDRESS
#SIPADD PARAM1
PARAM1 = XXX.XXX.XXX.XXX
WHERE XXX: 0 - 255
Command name (optional)
page | 77
Commands
[STRING]
Need help?
Do you have a question about the Multiview EXT-HD-MVSL-441 and is the answer not in the manual?