Gefen Multiview EXT-HD-MVSL-441 User Manual page 103

Chapter Advanced Operation
#set_hsize
The #set_hsize command sets the horizontal size of the specified window. param2 is
the number of horizontal pixels for the resolution of the specified window. This command is
only applicable when viewing multiple input (multiple windows). Executing this command
when viewing a single window will return an error.
Syntax
#set_hsize param1 param2
Parameters
param1
param2
Example
#set_hsize 1 600
SET HORIZONTAL STRETCH VALUE TO 600 PIXELS FOR WINDOW 1
If command is run when viewing a single window:
#set_hsize 1 600
CURRENT ROUTING STATE IS WRONG!
Window
Horizontal Pixels (active)
page | 93
Commands
[1 ... 4]
[0 ... n]