Gefen Multiview EXT-HD-MVSL-441 User Manual page 105

Chapter Advanced Operation
#set_ipadd
The #set_ipadd command sets the IP address of the 4x1 Multiview Seamless Switcher.
The IP address must be entered using dot-decimal notation. The switcher must be
rebooted after executing this command. The default IP address is 192.168.1.72.
Use the #show_ipconfig
4x1 Multiview Seamless Switcher.
Syntax
#set_ipadd param1
Parameters
param1
Example
#set_ipadd 192.168.1.190
IP ADDRESS : 192.168.1.190
or #show_ip command to display the current IP address of the
IP address
page | 95
Commands