Gefen Multiview EXT-HD-MVSL-441 User Manual page 83

Chapter Advanced Operation
#chromakey
The #chromakey command enables or disables chroma-keying. This command is only
applicable when viewing a single input (full screen). Executing this command when viewing
multiple windows will return an error.
Syntax
#chromakey param1
Parameters
param1
Examples
#chromakey 1
CHROMAKEY EFFECT ON
If command is run when viewing multiple windows:
#chromakey 1
CURRENT ROUTING STATE IS WRONG!
#chromakey_color
This command will be available in a future release of the firmware.
Value
Value Description
0
Disable
1
Enable
page | 73
Commands
[0 ... 1]