Gefen Multiview EXT-HD-MVSL-441 User Manual page 25

Operating the 4x1 Multiview Seamless Switcher for HDMI Chapter
The Default 1 preset uses Window A:
To switch to the Default 1 single-window configuration using the IR remote control,
press the Default Preset 1 button.
Default Preset 1
2. The image displayed on the output will be dictated by the current routing state of the
matrix. In this example, the source that is connected to Input 2 is displayed.
Input 1 Input 2
Single window displayed
(continued on next page)
page | 15
Window Basics
Input 3 Input 4