Advanced Operation
Chapter
#set_udp_remote_ip
The #set_udp_remote_ip command sets the remote UDP IP address. The IP address
must be specified using dot-decimal notation. The default UDP remote IP address is
192.168.1.255. The 4x1 Multiview Seamless Switcher must be rebooted after executing
this command.
Syntax
#set_udp_remote_ip param1
Parameters
param1
Example
#set_udp_remote_ip 192.168.1.227
UDP REMOTE IP ADDRESS : 192.168.1.227
UDP address
page | 106
Commands
Need help?
Do you have a question about the Multiview EXT-HD-MVSL-441 and is the answer not in the manual?