Gefen Multiview EXT-HD-MVSL-441 User Manual page 141

Advanced Operation Chapter
r
The r command routes the specified input to the output. Do not precede this command
with the "#" symbol. Also see the
(param1) will be routed to all outputs.
Syntax
r param1 param2
Parameters
param1
param2
Examples
r 3 a
INPUT 3 IS ROUTED TO WINDOW OUTPUT A
r 1 0
INPUT 1 IS SET TO ALL WINDOW OUTPUTS
s command. If param2 = 0, then the specified input
Input
Output
page | 131
Commands
[1 ... 4]
[0, A ... D]