Gefen Multiview EXT-HD-MVSL-441 User Manual page 102

Chapter Advanced Operation
#set_hposition
The #set_hposition command sets the horizontal position of the specified window.
param2 is the number of horizontal pixels for the resolution of the specified window.
This command is only applicable when viewing multiple input (multiple windows).
Executing this command when viewing a single window will return an error.
Syntax
#set_hposition param1 param2
Parameters
param1
param2
Example
#set_hposition 1 300
SET HORIZONTAL POSITION VALUE TO 300 PIXELS FOR WINDOW 1
If command is run when viewing a single window:
#set_hposition 1 300
CURRENT ROUTING STATE IS WRONG!
Window
Horizontal Pixels (active)
page | 92
Commands
[1 ... 4]
[0 ... n]