Gefen Multiview EXT-HD-MVSL-441 User Manual page 107

Advanced Operation Chapter
#set_ir
The #set_ir command will be available in a future release of firmware.
#set_netmask
The #set_netmask command sets the subnet mask. The subnet mask must be
entered using dot-decimal notation. The switcher must be rebooted after executing this
command. The default subnet mask is 255.255.255.0. Use the
#show_ipconfig command to display the current subnet mask of the switcher.
Syntax
#set_netmask param1
Parameters
param1
Example
#set_netmask 255.255.255.0
NETMASK : 255.255.255.0
Subnet mask
page | 97
Commands
#show_netmask or