TABLE OF CONTENTS Introduction Features Panel Descriptions Connecting and Operating the HDMI Switcher RMT2-IR Installation IR Confl ict Codes IR Extender Installation Specifi cations Warranty...
Our Commitment Gefen will always offer the fi nest quality product at the best possible price. Included in that price is a lifetime of support from a team of outstanding engineers. The Gefen HDMI Switcher allows two HDMI devices to be switched easily in to one HDMI compatible monitor or projector.
FEATURES Features • Switches easily between any two HDMI sources • Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions • Extends any HDMI compliant device by regenerating the HDMI signal • Maintains high resolution video—beautiful, sharp HDTV resolutions up to 1080P are easily achieved.
PANEL DESCRIPTIONS Connects to IR Indicates if port 1 or IR eye Selects port 1 extender port 2 is selected or port 2 HDMI In 2 HDMI Out Connects to HDMI In 1 5VDC power supply...
CONNECTING AND OPERATING THE HDMI SWITCHER How to Connect the HDMI Switcher to your devices 1 Connect the supplied HDMI to HDMI cables from the HDMI sources into the HDMI Switcher Input. 2 Connect the cable from your display (monitor or projector) into the HDMI Out of the HDMI Switcher.
The optional IR extender allows you to relocate your HDMI Switcher and still have IR control of the HDMI Switcher. This product is Gefen SKU# EXT-RMT- EXTIR. * The color of the product shown here may differ from the one you receive.
IR CODE CONFLICTS How to Resolve IR Code Confl icts There are matching pairs of dip switches underneath the Switcher unit (outlined below) and under the remote battery cover. Each has two switches which need to be matched for the remote to work. There are 4 possible sets of IR codes and at least one of these sets should be able to resolve any IR confl...
IR EXTENDER INSTALLATION How to Connect the IR Extender 1 Plug the IR extender into the Remote port on the front of the Switcher Unit 2 Flip the Dip Switch #1 underneath the unit from the set that is not outlined on the previous page to the ON position IR CODES In the event of IR confl...
SPECIFICATIONS Video Amplifi er Bandwidth ................165 MHz Input Video Signal ................... 1.2 volts p-p Input DDC Signal ................5 volts p-p (TTL) Single Link Resolution ................1920 x 1200 HDMI Input/Output Connector Type ........Type A (19 pin) female Power Consumption ................