SIP User's Manual
3.2
Using the Home Page
The 'Home' page provides you with a graphical display of the device's front panel,
displaying color-coded status icons for monitoring the functioning of the device. The 'Home'
page also displays general device information (in the 'General Information' pane) such as
the device's IP address and firmware version.
By default, the 'Home' page is displayed when you access the device's Web interface.
To access the Home page:
On the toolbar, click the Home
Note:
In addition to the color-coded status information depicted on the graphical display of the
device (as described in the subsequent table), the Home page displays various read-only
information in the General Information pane:
IP Address: IP address of the device
Subnet Mask: subnet mask address of the device
Default Gateway Address: default gateway used by the device
Digital Port Number: number of digital PRI ports (appears only if the device houses a
DIGITAL module)
BRI Port Number: number of BRI ports (appears only if the device houses a BRI
module)
Analog Port Number: number of analog (FXS and FXO) ports (appears only if the
device houses an FXS or FXO module)
Firmware Version: software version currently running on the device
Version 6.2
Figure 3-26: Mediant 600 Home Page
Figure 3-27: Mediant 1000 Home Page
The displayed number and type of telephony interface modules depends on
the device's hardware configuration.
icon; the 'Home' page is displayed.
51
3. Web-Based Management
February 2011