Security Parameters; General Security Parameters - AudioCodes Mediant 800B User Manual

Gateway & enterprise sbc (e-sbc)

Hide thumbs Also See for Mediant 800B:

Table of Contents

Source Interface Name

configure network > high-

availability > net-mon-

source-interface

[HAPingSourceIfName]

Ping Timeout

configure network > high-

availability > net-mon-ping-

[HAPingTimeout]

Ping Retries

configure network > high-

availability > net-mon-ping-

[HAPingRetries]

Security Parameters

This subsection describes the device's security parameters.

The general security parameters are described in the table below.

Firewall Table

User's Manual

Defines the device's IP network interface from where the ping is sent.

The valid value is the name of the IP interface as configured in the

'Interface Name' field of the IP Interfaces table. By default, no IP network

Defines the timeout (in seconds) for which the ping request waits for a

The valid value is 1 to 60. The default is 1.

Defines the number of ping requests that the device sends after no

response is received from the destination, before the destination is

declared unavailable. For example, if you specify 2, the destination is

declared as down after three consecutive ping requests fail to evoke a

response from the destination.

The valid value is 0 to 100. The default 2.

Table 72-24: General Security Parameters

Mediant 800B Gateway & E-SBC

Document #: LTRT-10632