Ldap Parameters - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Parameter
[AddPhoneContextAsPrefix]
A.11.13 LDAP Parameters
The Lightweight Directory Access Protocol (LDAP) parameters are described in the table
below. For more information on routing based on LDAP, refer to ''Routing Based on LDAP
Active Directory Queries'' on page 163.
Parameter
Web: LDAP Service
[LDAPServiceEnable]
Web: LDAP Server IP
[LDAPServerIP]
Web: LDAP Server Port
[LDAPServerPort]
Web: LDAP Server Domain Name
[LDAPServerDomainName]
Web: LDAP Password
[LDAPPassword]
Web: LDAP Bind DN
[LDAPBindDN]
Web: LDAP Search Dn
[LDAPSearchDN]
Web: LDAP Server Max Respond
Time
[LDAPServerMaxRespondTime]
[LDAPDebugMode]
Web: MS LDAP OCS Number
attribute name
[MSLDAPOCSNumAttributeName]
Version 6.4
and Calling numbers.

[0] Disable = Disable (default).

[1] Enable = Enable.
Table A-61: LDAP Parameters
Enables the LDAP feature.

[0] Disable (default)

[1] Enable
Note: For this parameter to take effect, a device reset is
required.
Defines the LDAP server's IP address in dotted-decimal
notation (e.g., 192.10.1.255). The default is 0.0.0.0.
Defines the LDAP server's port number.
The valid value range is 0 to 65535. The default port number
is 389.
Defines the host name of the LDAP server.
Defines the LDAP server's user password.
Defines the LDAP server's bind DN. This is used as the
username during connection and binding to the server.
For example: LDAPBindDN = "CN=Search
user,OU=Labs,DC=OCSR2,DC=local"
Defines the search DN for LDAP search requests. This is the
top DN of the subtree where the search is performed. This
parameter is mandatory for the search.
For example: LDAPSearchHDN = "CN=Search
user,OU=Labs,DC=OCSR2,DC=local"
Defines the time (in seconds) that the device waits for LDAP
server responses.
The valid value range is 0 to 86400. The default is 3000.
Determines whether to enable the LDAP task debug
messages. This is used for providing debug information
regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Defines the name of the attribute that represents the user
OCS number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "msRTCSIP-PrimaryUserAddress".
591
A. Configuration Parameters Reference
Description
Description
November 2011