AudioCodes Mediant 2000 User Manual page 203

SIP User's Manual
2. From the 'Profile ID' drop-down list, select the Tel Profile index.
3. In the 'Profile Name' field, enter an arbitrary name that enables you to easily identify
the Tel Profile.
4. From the 'Profile Preference' drop-down list, select the priority of the Tel Profile, where
1 is the lowest priority and 20 the highest. If both IP and Tel profiles apply to the same
call, the coders and other common parameters (noted by an asterisk in the description
of the parameter TelProfile) of the preferred Profile are applied to that call. If the
Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used. The order of the coders is determined by the
preference.
5. Configure the parameters as required. For more information on each parameter, refer
to the description of the "global" parameter.
6. From the 'Coder Group' drop-down list, select the Coder Group (see ''Configuring
Coder Groups'' on page 200) or the device's default coder (see ''Configuring Coders''
on page 199) to which you want to assign the Tel Profile.
7. Click Submit to apply your changes.
8. To save the changes to flash memory, see ''Saving Configuration'' on page 350.
Version 6.4 203
16. Coders and Profiles
November 2011