Configuring Snmp V3 Users - AudioCodes Mediant 2000 User Manual

SIP User's Manual
5.4

Configuring SNMP V3 Users

The SNMP v3 Users page allows you to configure authentication and privacy for up to 10
SNMP v3 users.

To configure the SNMP v3 users:
1. Open the SNMP v3 Users page (Maintenance tab > System menu > Management
submenu > SNMP submenu > SNMP V3 Users).
2. To add an SNMP v3 user, in the 'Add Index' field, enter the desired row index, and
then click Add Index. A new row appears.
3. Configure the SNMP V3 Setting parameters according to the table below.
4. Click the Apply button to save your changes.
5. To save the changes, see ''Saving Configuration'' on page 350.
Notes:
Parameter
Index
[SNMPUsers_Index]
User Name
[SNMPUsers_Username]
Authentication Protocol
[SNMPUsers_AuthProtocol]
Privacy Protocol
[SNMPUsers_PrivProtocol]
Authentication Key
[SNMPUsers_AuthKey]
Version 6.4
Figure 5-4: SNMP V3 Setting Page
•
For a description of the web interface's table command buttons (e.g.,
Duplicate and Delete), see ''Working with Tables'' on page 36.
•
You can also configure SNMP v3 users using the ini file table parameter
SNMPUsers (see ''SNMP Parameters'' on page 425).
Table 5-3: SNMP V3 Users Parameters
The table index.
The valid range is 0 to 9.
Name of the SNMP v3 user. This name must be unique.
Authentication protocol of the SNMP v3 user.

[0] None (default)

[1] MD5

[2] SHA-1
Privacy protocol of the SNMP v3 user.

[0] None (default)

[1] DES

[2] 3DES

[3] AES-128

[4] AES-192

[5] AES-256
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
Description
69
5. SNMP-Based Management
November 2011