Configuring Advanced Parameters - AudioCodes Mediant 2000 User Manual

3. Click Submit to apply your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 350.
17.2

Configuring Advanced Parameters

The Advanced Parameters page allows you to configure advanced SIP control parameters.
For a description of the parameters appearing on this page, see ''Configuration Parameters
Reference'' on page 409.

To configure advanced general protocol parameters:
1. Open the Advanced Parameters page (Configuration tab > VoIP menu > SIP
Definitions submenu > Advanced Parameters).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 350.
SIP User's Manual
Figure 17-1: Advanced Parameters Page
208
Mediant 2000
Document #: LTRT-68814