AudioCodes Mediant 2000 User Manual page 195

SIP User's Manual
8. Configure IP Groups in the IP Group Table page (Configuration tab > VoIP menu >
Control Network submenu > IP Group Table). The figure below configures IP Group
for ITSP A. Do the same for ITSP B but for Index 2 with SRD 1 and Media Realm to
"Realm2".
9. Configure IP-to-Trunk Group routing in the Inbound IP Routing Table page
(Configuration tab > VoIP menu > GW and IP to IP submenu > Routing submenu >
IP to Trunk Group Routing):
10. Configure Trunk Group-to-IP routing in the Outbound IP Routing Table page
(Configuration tab > VoIP menu > GW and IP to IP submenu > Routing submenu >
Tel to IP Routing):
Figure 14-13: Defining Trunk Group to IP Group Routing
Version 6.4
Figure 14-11: Defining IP Groups
Figure 14-12: Defining IP-to-Trunk Group Routing
195
14. Control Network
November 2011