Web-Based Management; Getting Acquainted With The Web Interface; Computer Requirements - AudioCodes Mediant 2000 User Manual

SIP User's Manual
3

Web-Based Management

The device's embedded Web server (hereafter referred to as the Web interface) provides
FCAPS (fault management, configuration, accounting, performance, and security)
functionality. The Web interface allows you to remotely configure the device for quick-and-
easy deployment, including the loading of software (.cmp), configuration (.ini), and auxiliary
files. The Web interface provides real-time, online monitoring of the device, including
display of alarms and their severity. In addition, the Web interface displays performance
statistics of voice calls and various traffic parameters.
The Web interface provides a user-friendly, graphical user interface (GUI), which can be
accessed using any standard Web browser (e.g., Microsoft™ Internet Explorer). Access to
the Web interface is controlled by various security mechanisms such as login user name
and password, read-write privileges, and limiting access to specific IP addresses.
Notes:
3.1

Getting Acquainted with the Web Interface

This section provides a description of the Web interface, including the areas of the GUI,
navigation, and configuration methods.
3.1.1

Computer Requirements

The client computer requires the following to work with the Web interface of the device:

A network connection to the device.

One of the following Web browsers:
•
Microsoft™ Internet Explorer™ (version 6.0 or later)
•
Mozilla Firefox

The following recommended screen resolutions: 1024 x 768 pixels, or 1280 x 1024
pixels.
Note:
Version 6.4
•
For a detailed description of all the parameters in the Web interface, see
''Configuration Parameters Reference'' on page 409.
•
The parameters in the Web interface can alternatively be configured
using their corresponding ini file parameters, which are enclosed in
square brackets "[...]" in ''Configuration Parameters Reference'' on page
409.
•
The Web interface allows you to configure most of the device's settings.
However, additional configuration parameters may exist that are not
provided in the Web interface and which can only be configured using ini
file parameters. These parameters are listed without a corresponding
Web parameter name in ''Configuration Parameters Reference'' on page
409.
•
Some Web interface pages are Software Upgrade Key dependant. These
pages appear only if the installed Software Upgrade Key supports the
features related to the pages. For viewing your Software Upgrade Key,
see ''Loading Software Upgrade Key'' on page 362.
®
(versions 2 or 3)
Your Web browser must be JavaScript-enabled to access the Web interface.
25
3. Web-Based Management
November 2011