AudioCodes Mediant 2000 User Manual page 572

Parameter
Web/EMS: Use Display Name as
Source Number
[UseDisplayNameAsSourceNum
ber]
Web: Use Routing Table for Host
Names and Profiles
EMS: Use Routing Table For Host
Names
[AlwaysUseRouteTable]
Web/EMS: Tel to IP Routing Mode
[RouteModeTel2IP]
Outbound IP Routing Table
Web: Outbound IP Routing Table
EMS: SIP Routing > Tel to IP
[Prefix]
SIP User's Manual
Name is received from the Tel side, the IP Display Name
remains empty (default).

[1] Yes = If a Tel Display Name is received, the Tel Source
Number is used as the IP Source Number and the Tel
Display Name is used as the IP Display Name. If no Display
Name is received from the Tel side, the Tel Source Number
is used as the IP Source Number and also as the IP Display
Name.

[2] Overwrite = The Tel Source Number is used as the IP
Source Number and also as the IP Display Name (even if the
received Tel Display Name is not empty).
Determines the use of Source Number and Display Name for IP-
to-Tel calls.

[0] No = If IP Display Name is received, the IP Source
Number is used as the Tel Source Number and the IP
Display Name is used as the Tel Display Name. If no Display
Name is received from IP, the Tel Display Name remains
empty (default).

[1] Yes = If an IP Display Name is received, it is used as the
Tel Source Number and also as the Tel Display Name, and
Presentation is set to Allowed (0). If no Display Name is
received from IP, the IP Source Number is used as the Tel
Source Number and Presentation is set to Restricted (1).
For example: When 'From: 100 <sip:200@201.202.203.204>' is
received, the outgoing Source Number and Display Name are
set to '100' and the Presentation is set to Allowed (0).
When 'From: <sip:100@101.102.103.104>' is received, the
outgoing Source Number is set to '100' and the Presentation is
set to Restricted (1).
Determines whether to use the device's routing table to obtain
the URI host name and optionally, an IP profile (per call) even if
a Proxy server is used.

[0] Disable = Don't use internal routing table (default).

[1] Enable = Use the Outbound IP Routing Table'.
Notes:

This parameter appears only if the 'Use Default Proxy'
parameter is enabled.

The domain name is used instead of a Proxy name or IP
address in the INVITE SIP URI.
For a description of this parameter, see ''Configuring Outbound
IP Routing Table'' on page 256.
This parameter table configures the Outbound IP Routing Table'
for routing Tel-to-IP and IP-to-IP calls. The format of this
parameter is as follows:
[PREFIX]
FORMAT PREFIX_Index = PREFIX_DestinationPrefix,
PREFIX_DestAddress, PREFIX_SourcePrefix,
PREFIX_ProfileId, PREFIX_MeteringCode, PREFIX_DestPort,
PREFIX_SrcIPGroupID, PREFIX_DestHostPrefix,
PREFIX_DestIPGroupID, PREFIX_SrcHostPrefix,
572
Description
Document #: LTRT-68814
Mediant 2000