AudioCodes Mediant 2000 User Manual page 596

Parameter
Web: SAS Inbound Manipulation
Mode
[SASInboundManipulationMode]
SAS Registration Manipulation Table
Web: SAS Registration
Manipulation
EMS: Stand-Alone Survivability
[SASRegistrationManipulation]
SIP User's Manual
emergency calls.
This valid value is a character string. The default is an empty
string "".
Enables destination number manipulation in incoming INVITE
messages when SAS is in Emergency the state. The
manipulation rule is done in the IP to IP Inbound Manipulation
table.

[0] = None (default)

[1] = Emergency only
Notes:

Inbound manipulation applies only to INVITE requests.

For more information on SAS inbound manipulation, see
''Manipulating Destination Number of Incoming INVITE'' on
page 331.
This parameter table configures the SAS Registration
Manipulation table. This table is used by the SAS application to
manipulate the SIP Request-URI user part of incoming INVITE
messages and of incoming REGISTER request AoR (To
header), before saving it to the registered users database. The
format of this table parameter is as follows:
[SASRegistrationManipulation]
FORMAT SASRegistrationManipulation_Index =
SASRegistrationManipulation_RemoveFromRight,
SASRegistrationManipulation_LeaveFromRight;
[\SASRegistrationManipulation]

RemoveFromRight = number of digits removed from the right
side of the user part before saving to the registered user
database.

LeaveFromRight = number of digits to keep from the right
side.
If both RemoveFromRight and LeaveFromRight are defined, the
RemoveFromRight is applied first. The registered database
contains the AoR before and after manipulation.
The range of both RemoveFromRight and LeaveFromRight is 0
to 30.
For example, the manipulation rule below routes an INVITE with
Request-URI header "sip:7184002@10.33.4.226" to user
"4002@10.33.4.226" (i.e., keep only four digits from right of user
part):
SASRegistrationManipulation 0 = 0, 4;
Notes:

You can only configure one index entry.

For a detailed description of the individual parameters in this
table and for configuring this table using the Web interface,
see ''Manipulating Destination Number of Incoming INVITE''
on page 331.
596
Description
Document #: LTRT-68814
Mediant 2000