Toolbar Description - AudioCodes Mediant 2000 User Manual

3.1.4

Toolbar Description

The toolbar provides frequently required command buttons, as described in the table
below:
Icon Button
Name
Submit
Device
Actions
Home
Log off
Note:
SIP User's Manual
Table 3-1: Description of Toolbar Buttons
Applies parameter settings to the device (see ''Saving Configuration''
on page 350).
Note: This icon is grayed out when not applicable to the currently
opened page.
Burn Saves parameter settings to flash memory (see ''Saving
Configuration'' on page 350).
Opens a drop-down menu list with frequently needed commands:

Load Configuration File: opens the Configuration File page for
loading an ini file (see ''Backing Up and Loading Configuration
File'' on page 369).

Save Configuration File: opens the Configuration File page for
saving the ini file to a folder on a computer (see ''Backing Up and
Loading Configuration File'' on page 369).

Reset: opens the Maintenance Actions page for resetting the
device (see ''Resetting the Device'' on page 347).

Software Upgrade Wizard: starts the Software Upgrade wizard
for upgrading the device's software (see ''Software Upgrade
Wizard'' on page 366).
Opens the Home page (see ''Using the Home Page'' on page 51).
Help Opens the Online Help topic of the currently opened configuration
page (see ''Getting Help'' on page 49).
Logs off a session with the Web interface (see ''Logging Off the Web
Interface'' on page 50).
If you modify parameters that take effect only after a device reset, after you
click the Submit button, the toolbar displays "Reset" (in red color), as shown
in the figure below. This is a reminder that you need to later save your
settings to flash memory and reset the device.
Figure 3-3: "Reset" Displayed on Toolbar
Description
28
Mediant 2000
Document #: LTRT-68814