AudioCodes Mediant 2000 User Manual page 542

Parameter
Web/EMS: Outgoing Calls Behavior
[ISDNOutCallsBehavior]
SIP User's Manual
implementation of CC is disabled allowing the application
to freely send UUI elements in any primitive, regardless
of the UUI-protocol requirements (UUI Implicit Service 1).
This allows more flexible application control on the UUI.
When this bit is not set (default behavior), CC implements
the UUI-protocol as specified in the ETS 300-403
standards for Implicit Service 1.

[65536] GTD5 TBCT = CC implements the VERIZON-
GTD-5 Switch variant of the TBCT Supplementary
Service, as specified in FSD 01-02-40AG Feature
Specification Document from Verizon. Otherwise, TBCT
is implemented as specified in GR-2865-CORE
specification (default behavior).
Note: When using the ini file to configure the device to
support several ISDNGeneralCCBehavior features, add the
individual feature values. For example, to support both [16]
and [32] features, set ISDNGeneralCCBehavior = 48 (i.e.,
16 + 32).
Determines several behaviour options (bit fields) that
influence the behaviour of the ISDN Stack outgoing calls. To
select options, click the arrow button, and then for each
required option, select 1 to enable. The default is 0 (i.e.,
disable).

[2] USER SENDING COMPLETE =The device doesn't
automatically generate the Sending-Complete IE in the
Setup message. If this bit is not set, the device generates
it automatically in the Setup message only.

[16] USE MU LAW = The device sends G.711-m-Law in
outgoing voice calls. When disabled, the device sends
G.711-A-Law in outgoing voice calls.
Note: This option is applicable only to the Korean variant.

[128] DIAL WITH KEYPAD = The device uses the
Keypad IE to store the called number digits instead of the
CALLED_NB IE.
Note: This option is applicable only to the Korean variant
(Korean network). This is useful for Korean switches that
don't accept the CALLED_NB IE.

[256] STORE CHAN ID IN SETUP = The device forces
the sending of a Channel-Id IE in an outgoing Setup
message even if it's not required by the standard (i.e.,
optional) and no Channel-Id has been specified in the
establishment request. This is useful for improving
required compatibility with switches. On PRI lines, it
indicates an unused channel ID, preferred only.

[572] USE A LAW = The device sends G.711 A-Law in
outgoing voice calls. When disabled, the device sends
the default G.711-Law in outgoing voice calls.
Note: This option is applicable only to the E10 variant.

[1024] = Numbering plan/type for T1 IP-to-Tel calling
numbers are defined according to the manipulation tables
or according to the RPID header (default). Otherwise, the
plan/type for T1 calls are set according to the length of
the calling number.

[2048] = The device accepts any IA5 character in the
called_nb and calling_nb strings and sends any IA5
542
Mediant 2000
Description
Document #: LTRT-68814