AudioCodes Mediant 2000 User Manual page 445

SIP User's Manual
Parameter
Web: Accounting Server IP
Address
[RADIUSAccServerIP]
Web: Accounting Port
[RADIUSAccPort]
Web/EMS: RADIUS Accounting
Type
[RADIUSAccountingType]
Web: AAA Indications
EMS: Indications
[AAAIndications]
Web: Device Behavior Upon
RADIUS Timeout
[BehaviorUponRadiusTimeout]
[MaxRADIUSSessions]
[RADIUSRetransmission]
[RadiusTO]
Web: RADIUS Authentication
Server IP Address
[RADIUSAuthServerIP]
Web: RADIUS Authentication
Server Port
[RADIUSAuthPort]
Web: RADIUS Shared Secret
[SharedSecret]
Web: Default Access Level
[DefaultAccessLevel]
Web: Local RADIUS Password
Cache Mode
[RadiusLocalCacheMode]
Version 6.4

[1] Enable = RADIUS application is enabled.
Note: For this parameter to take effect, a device reset is required.
Defines the IP address of the RADIUS accounting server.
Defines the port of the RADIUS accounting server.
The default value is 1646.
Determines when the RADIUS accounting messages are sent to
the RADIUS accounting server.

[0] At Call Release = Sent at call release only (default).

[1] At Connect & Release = Sent at call connect and release.

[2] At Setup & Release = Sent at call setup and release.
Determines the Authentication, Authorization and Accounting
(AAA) indications.

[0] None = No indications (default).

[3] Accounting Only = Only accounting indications are used.
Defines the device's response upon a RADIUS timeout.

[0] Deny Access = Denies access.

[1] Verify Access Locally = Checks password locally (default).
Defines the number of concurrent calls that can communicate with
the RADIUS server (optional).
The valid range is 0 to 240. The default value is 240.
Defines the number of retransmission retries.
The valid range is 1 to 10. The default value is 3.
Defines the time interval (measured in seconds) that the device
waits for a response before a RADIUS retransmission is issued.
The valid range is 1 to 30. The default value is 10.
Defines the IP address of the RADIUS authentication server.
Note: For this parameter to take effect, a device reset is required.
Defines the port of the RADIUS Authentication Server.
Note: For this parameter to take effect, a device reset is required.
Defines the 'Secret' used to authenticate the device to the
RADIUS server. This should be a cryptically strong password.
Defines the default access level for the device when the RADIUS
(authentication) response doesn't include an access level
attribute.
The valid range is 0 to 255. The default value is 200 (Security
Administrator').
Determines the device's mode of operation regarding the timer
(configured by the parameter RadiusLocalCacheTimeout) that
determines the validity of the user name and password (verified by
the RADIUS server).

[0] Absolute Expiry Timer = when you access a Web page, the
445
A. Configuration Parameters Reference
Description
November 2011