Privacy; Proxy-Require - AudioCodes Mediant 2000 User Manual

SIP User's Manual
Below are header manipulation examples:
Example 1 Rule:
Result:
Example 2 Rule:
Result:
C.2.17 Privacy
An example of the header is shown below:
Privacy: none
The header properties are shown in the table below:
Header Level Action
Operations Supported
Keyword

privacy

Below are header manipulation examples:
Example 1 Rule:
Result:
Example 2 Rule:
Result:
C.2.18 Proxy-Require
An example of the header is shown below:
Proxy-Require: sec-agree
The header properties are shown in the table below:
Header Level Action
Operations Supported
Version 6.4
Add a P-Preferred-Identity header to all messages:
MessageManipulations 1 = 1, any, , header.P-Preferred-
Identity, 0, "'Cullen Jennings <sip:fluffy@abc.com>'",
0;
P-Preferred-Identity: "Cullen Jennings"
<sip:fluffy@abc.com>
Modify the display name in the P-Preferred-Identity header:
MessageManipulations 2 = 1, any, , header.P-Preferred-
Identity.name, 2, "'Alice Biloxi'", 0;
P-Preferred-Identity: "Alice Biloxi"
<sip:fluffy@abc.com>
Add
Yes
''Privacy Struct'' on page
634
Add a privacy header and set it to ''session':
MessageManipulations 1 = 1, any, , header.Privacy, 0,
"'session'", 0;
Privacy: session
Add 'user' to the list:
MessageManipulations 1 = 3, , ,
header.privacy.privacy.user, 2, '1', 0;
Privacy: session;user
Add
Yes
C. SIP Message Manipulation Syntax
Delete Modify
Yes No
Sub Types
Delete Modify
Yes Yes
619
List Entries
N/A
Attributes
Read/Write
List Entries
N/A
November 2011