Saving A Scenario To A Pc - AudioCodes Mediant 2000 User Manual

SIP User's Manual
•
Edit the Scenario Name:
a.
b.
•
Remove a Step:
a.
b.
c.
5. After clicking Next, a message box appears notifying you of the change. Click OK.
6. Click Save & Finish; a message box appears informing you that the Scenario has
been successfully modified. The Scenario mode is exited and the menus of the
Configuration tab appear in the Navigation tree.
3.1.8.4

Saving a Scenario to a PC

You can save a Scenario to a PC (as a dat file). This is especially useful when requiring
more than one Scenario to represent different environment setups (e.g., where one
includes PBX interoperability and another not). Once you create a Scenario and save it to
your PC, you can then keep on saving modifications to it under different Scenario file
names. When you require a specific network environment setup, you can simply load the
suitable Scenario file from your PC (see ''Loading a Scenario to the Device'' on page 46).

To save a Scenario to a PC:
1. On the Navigation bar, click the Scenarios tab; the Scenario appears in the
Navigation tree.
2. Click the Get/Send Scenario File button (located at the bottom of the Navigation
tree); the Scenario File page appears, as shown below:
3. Click the Get Scenario File button; the 'File Download' window appears.
Version 6.4
In the 'Scenario Name' field, edit the Scenario name.
In the displayed page, click Next.
In the Navigation tree, select the required Step; the corresponding page
opens in the Work pane.
In the page, clear all the check boxes corresponding to the parameters.
Click Next.
Figure 3-23: Scenario File Page
45
3. Web-Based Management
November 2011