AudioCodes Mediant 2000 User Manual page 192

Mediant 2000
The figure below illustrates a typical scenario for implementing multiple SIP signaling
interfaces. In this example, different SIP signaling interfaces and RTP traffic interfaces are
assigned to Network 1 (ITSP A) and Network 2 (ITSP B).
Below provides an example for configuring multiple SIP signaling and RTP interfaces. In
this example, the device serves as the interface between the enterprise's PBX (connected
using an E1/T1 trunk) and two ITSP's, as shown in the figure below:
Figure 14-4: Multiple SIP Signaling/RTP Interfaces Example
SIP User's Manual 192 Document #: LTRT-68814