AudioCodes Mediant 2000 User Manual page 244

Parameter
Source IP Group
Web: Destination Prefix
EMS: Prefix
Web/EMS: Source Prefix
Web/EMS: Source IP
Address
Web: Stripped Digits From
Left
EMS: Number Of Stripped
Digits
Web: Stripped Digits From
Right
EMS: Number Of Stripped
Digits
Web: Prefix to Add
EMS: Prefix/Suffix To Add
Web: Suffix to Add
EMS: Prefix/Suffix To Add
SIP User's Manual
The IP Group from where the IP-to-IP call originated. Typically, this IP
Group of an incoming INVITE is determined/classified using the
'Inbound IP Routing Table'. If not used (i.e., any IP Group), simply leave
the field empty.
Notes:

The value -1 indicates that this field is ignored in the rule.

This parameter is available only in the 'Source Phone Number
Manipulation Table for Tel -> IP Calls' and 'Destination Phone
Number Manipulation Table for Tel -> IP Calls pages.

If this Source IP Group has a Serving IP Group, then all calls
originating from this Source IP Group are sent to the Serving IP
Group. In this scenario, this table is used only if the parameter
PreferRouteTable is set to 1.
Destination (called) telephone number prefix and/or suffix. For
example, [100-199](100,101,105) depicts a number that starts with 100
to 199 and ends with 100, 101 or 105. For a description of notations
that you can use to represent single and multiple numbers (ranges),
see ''Dialing Plan Notation for Routing and Manipulation Tables'' on
page 607.
Source (calling) telephone number prefix and/or suffix. For example,
[100-199](100,101,105) depicts a number that starts with 100 to 199
and ends with 100, 101 or 105. For a description of notations that you
can use to represent single and multiple numbers (ranges), see ''Dialing
Plan Notation for Routing and Manipulation Tables'' on page 607.
Source IP address of the caller (obtained from the Contact header in
the INVITE message).
Notes:

This parameter is applicable only to the Number Manipulation tables
for IP-to-Tel calls.

The source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all IP addresses
between 10.8.8.10 to 10.8.8.99.

The source IP address can include the asterisk (*) wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all IP addresses between 10.8.8.0 and 10.8.8.255.
Number of digits to remove from the left of the telephone number prefix.
For example, if you enter 3 and the phone number is 5551234, the new
phone number is 1234.
Number of digits to remove from the right of the telephone number
prefix. For example, if you enter 3 and the phone number is 5551234,
the new phone number is 5551.
The number or string that you want added to the front of the telephone
number. For example, if you enter '9' and the phone number is 1234,
the new number is 91234.
The number or string that you want added to the end of the telephone
number. For example, if you enter '00' and the phone number is 1234,
the new number is 123400.
244
Description
Document #: LTRT-68814
Mediant 2000