Power Slope Operation
Select Power Sweep (asterisk on).
Press (SINGLE].
The synthesizer performs a power sweep beginning at -20 dBm and
ending at f5 dBm. The power meter indicates +25 dB.
This function allows for compensation of high frequency system or
cable losses by linearly increasing the power output as the frequency
increases. For this example refer to the "Menu Map" section.
Power Slope
Press
, the active entry area displays:
X. XX dB/GHz,
Power slope is now active, notice that an asterisk is next to the key
label.
Use the entry keys, rotary knob, or arrow keys to enter a value for
the linear slope.
Press Power Slope again to turn this feature off.
where X is a numeric value.
Getting Started Basic l-19