HP 8360 User Handbook Manual page 222

Function Group
Menu Map
Description
Programming Codes
See Also
USER CAL
9
This softkey initiates a full synthesizer user calibration. The
calibration performed is instrument state dependent. For example, if
the synthesizer is in ramp sweep mode, a sweep span calibration and
an auto track is done. If the synthesizer has amplitude modulation
active on a CW signal, then RF peaking and an AM bandwidth
calibration is performed.
See the individual types of calibration.
Analyzer:
NONE
AM BW Cal Always, AM BW Cal Once, Auto Track,
Peak RF Always, Peak RF Once, Swp Span Cal Always,
Swp Span Cal Once
HP 8360
User's Handbook