HP 8360 User Handbook Manual page 367

Step Swp Menu
Function Group
Menu Map 2
Description
Programming Codes
See Also
HP 8360
User's Handbook
FREQUENCY
This softkey reveals the stepped
Dwell Coupled
Step Control Master
Step Control Slave
Step Dwell
Step Points
Step Size
Step Swp Pt Trig Auto
Step Swp Pt Trig Bus
Step Swp Pt Trig Ext
SCPI: NONE
Analyzer: NONE
Mode
"Using Step Sweep," in Chapter 1.
frequency
sweep entry menu.
Couples the dwell time for stepped
sweep points to ramp sweep, sweep
time.
Causes the synthesizer to act as the
master control in a dual synthesizer
measurement setup.
Causes the synthesizer to act as
the slave in a dual synthesizer
measurement setup.
Sets the dwell time for points in
stepped sweep.
Sets the number of points in a
stepped sweep.
Sets the increment value for the
points in a stepped sweep.
Automatically steps the synthesizer
to the next point in a stepped
sweep.
Steps the synthesizer to the next
point in a stepped sweep when an
HP-IB trigger is received.
Steps the synthesizer to the next
point in a stepped sweep when
an external hardware trigger is
received.
Operating and Programming Reference S-69
Swp Menu
Step