HP 8360 User Handbook Manual page 173

Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User's Handbook
FREQUENCY
NONE
This hardkey lets you select the center frequency for center
frequency/frequency span swept operation. When you press [?Ki=i$,
the synthesizer displays: --> CENTER:
represents a frequency value. Use the entry area to set the desired
value.
Certain center frequency and frequency span combinations cause the
synthesizer to limit the value entered. In general, any combination
that would cause the synthesizer to exceed its minimum or maximum
specified frequency will be limited.
FREQuency:CENTer <num>[freq suffix] or
FREQuency:MODE SWEep
Analyzer:
CF
(SPAN), (m), (STOP)
"Center Frequency/Span Operation" in Chapter 1.
XXXXX MHz. Where XXXXX
Operating and Programming Reference C-l
C