Programming Codes
Pulse On/Off
Scalar
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User's Handbook
PULSe:SOURce INTernal
PULSe[:STATe] ON]OFF]l]O
Analyzer:
NONE
Menu
(MOD)
4
This softkey activates pulse modulation mode, and sets the internal
pulse generator to produce 27.778 kHz square wave pulses
(18 ps pulse width, 36 ps pulse period). The rise and fall times of
the RF envelope are approximately 2 /.Ls. These pulses allow proper
operation with HP scalar network analyzers in ac detection mode.
An asterisk next to the key label indicates that this feature is active.
PULSe:SOURce SCALar
PULSe[:STATe] ON]OFF]l]O
Analyzer:
SHPM function on, PM0 function off.
"INSTALLATION," Chapter 3.
Operating and Programming Reference P-19
Pulse On/OffScalar