HP 8360 User Handbook Manual page 490

transition, l-102
firmware datecode identify, S-60
flatness array
frequency value, E-2
user, F-4
flatness corrected power, I-33
flatness correction
clear value, C-3
copy frequency list, C- 12
frequency increment, A-22
HP 437B measure at all frequencies, M-7
HP 437B measure at one frequency, M-7, M-8
HP 437B measure functions, M-27
number of points, A-23
start frequency, A-24
stop frequency, A-25
flatness correction, example program, l-97
flatness menu, F-4
flatness on/off, F-11
FM
deviation, I-4
rate, I-5
FM coupling, M-17
FM deviation, maximum, M-17
FM input connector, C-5
FM modulation, M-16
FM on/off AC, F-13'
FM on/off DC, F-14
FM on/off ext, F-15
FM on/off int, F-15
FM output
rear panel, M-11
FM waveform
noise, I-5
ramp, I-6
square, I-7
forgiving listening, l-66, l-82
frequency
center, C- 1
coupled to center, C-14
c w , c-14
difference marker, D-5
display zero, Z-l
stepped sweep functions, S-68
sweep mode define start, S-61
frequency calibration menu, F-16
frequency-correction pair, E-2
frequency follow, F-17
frequency increment, A-22
frequency list
dwell time, E-2
dwell time, all points, G-l
frequency increment, A-22
frequency value, E-3