HP 8360 User Handbook Manual page 370

See Also
SWEEP @ii-)
Function Group
Menu Map 7
Description
(CENTER), (cw), FREQUENCY (MENU), (ml, (K)
"CW Operation Start/Stop Frequency Sweep," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
SWEEP
This hardkey accesses the sweep menu softkeys.
Manual Sweep
Start Sweep Trigger Auto
Start Sweep Trigger Bus
Start Sweep Trigger Ext
Sweep Mode List
Sweep Mode Ramp
Sweep Mode Step
Activates manual sweep mode.
Depending on what parameter is
sweeping, frequency and/or power
can be changed manually with the
rotary knob or the arrow keys.
Automatically triggers a sweep
when (SINGLE) or [CONT) is pressed.
Waits for an HP-IB trigger to
trigger a sweep when (=I or
Waits for an external hardware
trigger to trigger a sweep when
Activates the list frequency sweep
mode.
Activates the analog frequency
sweep mode.
Activates the stepped frequency
sweep mode.
Sets the sweep time to a minimum
value for a given span.
Sets the time delay after phase-lock
and before a trigger pulse is sent
from the ANALYZER INTERFACE
BNC. A source settled SRQ is
generated.
HP 8360