Peak Rf Always - HP 8360 User Handbook Manual

P

Peak RF Always

Function Group
POWER, USER CAL
Menu Map 5,9
Description This softkey appears in two locations: the POWER Tracking Nenu
and the USER CAL Tracking Menu. The operation is the same in
both locations.
This softkey causes the synthesizer, when in CW or manual-sweep
output mode, to align the output filter (SYTM) so that its passband
is centered on the RF output. Peaking is used to obtain both the
maximum available power and spectral purity, and the best pulse,
FM envelopes, at a given frequency. This peaking occurs each time
the frequency is changed, or every seven minutes. An asterisk next to
the key label indicates this function is active.
SCPI:
Programming Codes
CALibration:PEAKing:AUTO ON~OFF~l~O
Analyzer:
Menu
See Also Auto Track, Peak RF Once, Tracking
"Optimizing Synthesizer Performance," in Chapter 1.
Operating and Programming Reference P-l
HP 8360
User's Handbook