HP 8360 User Handbook Manual page 480

D-submilliature receptacle, rearpanel.)
Outputs the pulse modulation waveform that is supplied to the modulator. This can be either
the intemally/extemally generated pulse modulation signal. (l3NC female, rear panel.)
Pulse Sync Gut (option 002 only)
Outputs a 50 N wide ITL pulse synchronized to the leading edge of the
intemally-generatcd pulse @NC female, rear panel.)
AM/FM Output
The FM scaling depends on the FM deviation selected. (DNC female, rear panaL)
Models
With this option, minimum settable output power is -110 dBm. Maximum leveled output
Option 002
Adds a digitally-qnthcsized internal modulation waveform somce-on-a-card to the
HP 8360. It provides signals that would otherwise be supplied to the external modulation
inputs.
For security, tamper-resistance, and cost sayings in automated system applicauous, this
option deletes the keybowd and display. Option 003 does NOT move the front panel
connectors to the rear panel, however, so in most cases, Gption 004 should be ordcmd in
option 004 Rear Panel,BF output
Moves RF Gutpat, lkkmal ALC Input, Pulse InpuWutp~~ Ah4 Input, and FM Input
Option 006 Fast Pulse Madulation
harmonic pehmmce Not available on the HP 83623A and HP 8362Ak
option 806 Rack slide Kit
Used to radr mount HP 8360 while permitting acmss to internal spaces.
Used to rack mount HP 8360 without tint handles
option 910 Extra opcrahg 8 service Manuals
HP 8360
User's Handbook
Internal Modulation Generator
Change A 5-21