Extdetcal - HP 8360 User Handbook Manual

Function Group
Menu Map
Description
Programming Codes
See Also
Ext Det Cal
Function Group
Menu Map 9
Description
Programming Codes
See Also
HP 8360
User's Handbook
ENTRY
NONE
This softkey lets you turn off (blank) the active entry area and
disable the ARROW keys, rotary knob, and entry keys. When
any function key (hard or soft) is pressed, the active entry area is
reactivated. The yellow LED, ENTRY ON, next to
indicates whether the entry area is active (LED on=active).
SCPI:
No specific code activates
Arrow Keys
"Entry Area" in Chapter 1.
USER CAL
This softkey enables the synthesizer to act as a controller to an HP
the interface bus and generates an HP-IB error if no power meter is
present on the interface bus or if the synthesizer is unable to address
the power meter. Use external detector calibration to characterize
and compensate for an external negative diode detector used in an
external leveling configuration.
CALibration:PMETer:DETector:INITiate? DIODe
CALibration:PMETer:DETector:NEXT? <num>[lvl suffix]
"Optimizing Synthesizer Performance" in Chapter 1.
Operating and Programming Reference E-5
Ext Det Cal