Function Group LMOD)
Menu Map 4
This softkey lets you enable a security feature that displays zeroes for
all accessible frequency information. Once this security feature is
activated, it can be turned off by a front panel (PRESET). An asterisk
next to the key label indicates that this feature is active.
SCPI: SYSTem:SECurity[:STATe] ON
The waveform menu (Option 002 only) allows you to choose sine,
square, triangle, ramp, and noise waveforms for internal AM and
FM. The default is sine wave. There are two waveform menus. The
waveform menu in the AM menu sets the waveform for amplitude
modulation only. The waveform menu in the FM menu sets the
waveform for frequency modulation only.
SCPI: NONE, see the individual softkeys listed.
Operating and Programming Reference Z-1