No specific command is available, but the key can be
addressed, see SCPI Key Numbers.
"Entry Area" and "Creating and Applying the User Flatness
Correction Array" in Chapter 1.
This hardkey lets you select any softkey and assign its function to
1 of 12 user defined keys in the
message appears on the synthesizer display:
assigned. Complete keypaths are assigned not just the key label.
For example, assigning List Menu to the user defined menu, copies
the complete structure (keypath) of that key. All of the pages and
lower level menus are placed within the user defined menu.
The first <n> in the above command, corresponds to the key number
to be assigned, while the second <n> corresponds to the user menu
key where it is to be placed in the user menu.
SCPI Key Numbers, USER DEFINED (MENU]
Menu. The following