Menu Map 8
This softkey accesses the security function softkeys.
Turns off the synthesizer's data display, active
entry, and message line areas.
Writes alternating ones and zeros over all
synthesizer state functions and save/recall registers
a selectable number of times, then returns the
synthesizer to the factory-preset state of operation.
Disables the save function.
Displays zeros for all accessible frequency
The features listed above together with the softkeys Freq Offset
provide the synthesizer with security controls
for a variety of situations. The local lockout (LLO) programming
command adds security when the synthesizer is used in an ATE
environment. A security calibration constant that can be accessed
through the service adjustment menu (requires a password for access)
is available also. Refer to the
"Using the Security Features," in Chapter 1.
for information on