8360 Adz-S - HP 8360 User Handbook Manual

8360 Adrs
Function Group
Menu Map
Description
Programming Codes
See Also
Enter Corr
Function Group
Menu Map
Description
HP 8360
User's Handbook
SYSTEM
8
This softkey lets you change the HP-IB address of the synthesizer.
Enter the address desired using the numeric entry keys or the
up/down arrow keys. The address value may be set between 0 and
30. The synthesizer stores the address value in non-volatile memory.
The default address of the synthesizer is 19.
SCPI:
SYSTem:COMMunicate:GPIB:ADDRess
Analyzer:
NONE
Menu
Connectors, HP-IB
"Getting Started Programming," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
POWER
5
This softkey lets you enter a power correction value for a frequency
point in the flatness array. A frequency point must be entered before
a correction value can be accepted, otherwise the following error
message appears:
ERROR - Must first enter correction freq. The up/down arrow
keys let you scroll through the frequency points available for power
correction. If no correction value is entered for a frequency point, the
synthesizer display indicates Undefined. The range of acceptable
values is -40 to +40 dB. An asterisk next to the key label indicates
that this feature is active.
Operating and Programming Reference E-l