AM Type 100%/V
This softkey (Option 002 only) scales the amplitude modulation
function linearly. The amplitude of the RF output changes linearly
as a function of AM input changes (or at a rate set by softkey for
internal AM). S ee "Specifications" for the AM characteristics, input
range, and damage level. An asterisk next to the key label indicates
that this feature is active.
Analyzer: AM1 function on, AM0 function off
"Optimizing Synthesizer Performance" in Chapter 1.
The following is the status register structure of the synthesizer when
the analyzer programming language is selected. This status structure
is the structurally and syntactically the same as on the HP 8340/41.
bytes from the synthesizer. The first status byte concerns
the cause of an SRQ (S ervice Request), while the second
status byte concerns failures and faults, as follows:
ANALYZER STATUS REGISTER
Operating and Programming Reference A-19