HP 8360 User Handbook Manual page 207

Function Group
Menu Map 5
Description
HP 8360
User's Handbook
POWER
This softkey reveals the softkeys in the flatness correction menu that
control user-defined leveling parameters.
Auto Fill Incr Automatically creates a frequency list with all
points separated by the specified increment in a
given frequency range.
Automatically creates a frequency list
Auto Fill %Pts
containing the specified number of points in a
given frequency range.
Sets the start frequency of the flatness
Auto Fill Start
correction array that will load automatically
when either the number of points or the
increment size is specified.
Sets the stop frequency of the flatness array
Auto Fill Stop
that will load automatically when either the
number of points or the increment size is
specified.
Changes the power correction value for the
Clear Point
indicated frequency point to the undefined state.
Copies the frequency list, (see List Menu ),
Copy List
into the frequency parameter of the flatness
correction array.
Disables the frequency-correction pair array and
uses the HP-IB transferred 1601 point correction
set to apply correction information.
Reveals the delete softkeys.
Delete Menu
Enables the entry of a power correction value
Enter Corr
for a frequency point.
Enables the entry of a single frequency point
Enter Freq
into the flatness correction array.
Sets the synthesizer to CW frequency mode so
Freq Follow
that the corresponding correction values can be
entered.
Reveals the softkeys in the power meter measure
Mtr Meas Menu
correction menu.
The softkeys in this menu help front panel users enter and edit
flatness correction parameters. These editing softkeys are not
Operating and Programming Reference F-5
Fltness