Markermi - HP 8360 User Handbook Manual

Marker Ml
Function Group
Menu Map 3
Description
Programming Codes
See Also
MARKER
The softkeyslabeled Marker Ml
identically. The softkey turns the marker off/on. When an asterisk
appears next to the key label, it indicates
not necessarily active. A marker is only active when it is indicated in
the active entry area.
The active entry area displays the active marker and its frequency
value. Use the rotary knob, the ARROW keys, or the entry keys to
set the frequency. Markers are displayed normally as Z-axis intensity
dots, but can be changed to amplitude pulses (Amp1
When a marker is turned off, the frequency value of that marker
is retained in memory. If the marker is reactivated, the stored
frequency value is recalled for that marker.
The frequency value of Ml and of M2 can also be used to define
parameters in two other marker features:
Start-Ml
MARKer[l]:STATe ON]OFF]l]O
Analyzer:
Ml function on, MO function off.
"Marker Operation," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
through Marker M5 function
that the marker is on, but
Markers ).
User's Handbook
HP 8360