List Mode Pt Trigext; (Local - HP 8360 User Handbook Manual

List Mode Pt Trig
Ext
Function Group
Menu Map
Description
Programming Codes
See Also
( L O C A L )
Function Group
Menu Map
Description
Programming Codes
See Also
HP 8360
User's Handbook
FREQUENCY
2
This softkey lets you set the trigger point to be an external hardware
trigger. When the synthesizer receives an external hardware trigger,
it steps to the next frequency point of the frequency list, provided
the synthesizer is in sweep list mode.
SCPI:
LIST:TRIGger:SOURce EXTernal
Analyzer:
NONE
Menu, Sweep Mode List
List Menu, 9t Trig
"Creating and Using a Frequency List," in Chapter 1.
INSTRUMENT STATE
NONE
This hardkey lets you cancel remote operation and return the
synthesizer to front panel operation. The front panel keys are
deactivated when the synthesizer is operated remotely. If the external
controller executes a LOCAL LOCKOUT command, pressing the
SCPI:
LOCAL
Analyzer:
LOCAL
NONE
"Getting Started Programming," in Chapter 1.
"Programming Typical Measurements," in Chapter 1.
Operating and Programming Reference L-9