Rack Flange Kit For Synthesizers With Handles Removed Contents - HP 8360 User Handbook Manual

Rack Flange Kit for
Synthesizers with
Handles Removed
(Option 908) kit*
CAUTION
Specifications
Option 908 synthesizers are supplied with rack flanges and the
necessary hardware to install them on the synthesizer after removing
the instrument handles. The following table itemizes the parts in this
Rack Flange Kit for Synthesizers with Handles Removed
Ventilation Requirements:
cabinet, the convection into and out of the instrument must not be
restricted. The ambient temperature (outside the cabinet) must be
less than the maximum operating temperature of the instrument
by 4 "C for every 100 watts dissipated in the cabinet. If the total
power dissipated in the cabinet is greater than 800 watts, then forced
convection must be used.
Table 3-4.
Contents
D e s c r i p t i o n 1
2
Rack Mount Flanges
8 Screws
When installing the instrument in a
INSTALLATION 3-13