Center=Marker; Clear Fault - HP 8360 User Handbook Manual

Function Group
Menu Map 3
Description
Programming Codes
See Also

Clear Fault

Function Group
Menu Map
Description
Programming Codes
See Also
MARKER
This softkey sets the center frequency of the sweep to the frequency
of the most recently activated marker. Select any marker Ml . . .
then select Center=Marker to change the center frequency of
the sweep to that of the marker. The frequency span does not change
unless the new sweep limits fall outside the frequency range of the
synthesizer, in that case the synthesizer automatically scales the
frequency span to be within the synthesizer's operating frequency
range.
FREQuency:CENTer <freq from above> [freq suffix]
Analyzer:
MC
"Marker Operation" in Chapter 1.
SERVICE
6
This softkey clears all the latched fault status indicators.
SCPI:
DIAGnostics:OUTPut:FAULts
The above command relays the fault information and clears all faults.
Analyzer:
NONE
Fault
Menu
HP 8360
User's Handbook