Pulse On/Offintxnl - HP 8360 User Handbook Manual

Pulse h/Off
Function Group
Menu Map
Description
Programming Codes
See Also
Pulse On/Off
Function Group
Menu Map
Description
4
This softkey activates the pulse modulation mode for an external
pulse source. The pulse source is connected to the PULSE INPUT
BNC connector and fed to the pulse modulator through a buffer
circuit.
When pulse modulation is in effect, the RF output is turned on
(programmed power is produced) and off (>80 dB attenuation) at a
rate determined by the pulse modulation input. Pulse and amplitude
modulation can be in effect simultaneously. An asterisk next to the
key label indicates that this feature is active.
PULSe:SOURce EXTernal
PULSe[:STATe] ON]OFF]l]O
Analyzer:
4
This softkey activates pulse modulation mode using the internal pulse
generator. No external connection is needed. When internal pulse
modulation is selected the PULSE INPUT BNC becomes an output
for the internally generated signal. An asterisk next to the softkey
label indicates that this feature is active. The pulse parameters
(width, period, rate, rise time, etc.) are controlled by softkeys. See
Pulse Menu (or
for a list of these softkeys.
Menu for synthesizers with Option 002)
HP 8360
User's Handbook