Line Switch; Listmenu - HP 8360 User Handbook Manual

LINE SWITCH

Function Group
Menu Map
Description
Programming Codes
See Also
List Menu
Function Group
Menu Map 2
Description
HP 8360
User's Handbook
NONE
NONE
The line switch (on/off switch) has two positions, off or standby and
on. If line power is connected to the synthesizer and the line switch
is set to off, the synthesizer is in the standby state (amber LED on).
Standby provides power to the internal frequency standard oven.
When line power is connected and the line switch is set to on, the
synthesizer power supplies are enabled and a limited self-test is
initiated. The CPU self test is performed; power supplies and the
front panel processor are checked.
NONE
"INSTALLATION" for information on fuses.
"Error Messages" for information on messages displayed at power on.
FREQUENCY
This softkey allows access to the frequency list functions.
Automatically creates a frequency list using the
Auto Fill lncr
user-specified increment value.
Automatically creates a frequency list
Auto Fill %Pts
containing a user-specified number of points.
Allows the entry of a start frequency for the
Auto Fill Start
frequency list.
Allows the entry of a stop frequency for the
Auto Fill Stop
frequency list.
Reveals the frequency list delete menu.
Delete Menu
point in the frequency list.
Allows the entry of a frequency point into the
Enter List Freq
frequency list.
Operating and Programming Reference L-5
List Menu